FRONT PANEL DESCRIPTION
(Indicators 1-9 shown only for Channel 1, Channel 2 has exactly identical corresponding functions)
1. Input jack – Accepts a standard 6.25mm (1/4
”
) audio jack for connecting active or passive basses using a properly
shielded cable.
2. Gain – Adjusts the input gain of the preamp stage.
3. Signal Level LED – This LED, when green indicates that the input is at least 0dBU (0.77V RMS). When red, it
indicates clipping in the preamp stage. If the preamp is clipping, turn down the gain on some of the preamp stage
controls (Gain, EQ or Compression as applicable).
4. Mute ON/OFF – Engaging this switch will mute all outputs except for the Tuner Out. When not engaged, the
respective channel is activated.
5. Mute LED – Indicates Mute status. Red indicates channel is muted (Mute ON), green indicates channel is active (Mute OFF).
6. Equalizer – 4-Band EQ provides +/- 12 dB of gain for each band.
• BASS – 100Hz
• LOW MID – 800Hz
• HIGH MID – 3kHz
• TREBLE – 10kHz
7. Compression Amount – This knob controls, as the name says, the amount of compression by providing simultaneous control
over compression threshold and make-up gain. The Compression knob, whenever engaged should be used in conjunction with
the Gain control. Settings of up to about 12 o
’
clock add a subtle compression. This setting will only compress the most
aggressive transients in your signal. Setting the knob at around 3 o
’
clock yields a heavy compression effect, with more
make-up gain. We designed our compressor to be completely transparent and to not color the signal in any way.
8. Compressor LED – When green, this indicates that the compressor is engaged. When orange, it indicates that the
signal is getting compressed.
9. Compression ON/OFF – This switch engages/bypasses the compressor circuit.
10. Volume – This knob controls the master volume.
11. Amp Clip LED – This LED indicates that the output from the power amp module is clipping. If the power amp is
clipping, turn down the master volume.
12. AUX IN jack – Accepts a standard 3.5mm (1/8
”
) audio jack (stereo compatible) for connecting an auxiliary sound
source. This can be used for connecting a CD, tape or MP3 player for practicing, rehearsing or for connecting another
preamp into the system.
13. HEADPHONES – Accepts a standard 3.5mm (1/8
”
) audio jack for connecting headphones.
8
GAIN
GAIN
VOLUME
BASS
LOW MID
HIGH MID TREBLE
COMPRESSOR
CHANNEL 1
CHANNEL 2
0N
ON
AMP CLIP
AUX IN
HEADPHONES
0 12
0 12
0 12
0 12
0 12
-12 +12 -12 +12 -12 +12 -12 +12
-12 +12 -12 +12 -12 +12 -12 +12
BASS
LOW MID
HIGH MID TREBLE
COMPRESSOR
AMOUNT
AMOUNT
OFF
OFF
MUTE
OFF
ON
MUTE
0
0 0 0
0 0
0 0
LWA 1000
INPUT
INPUT
2
3
OFF
ON
4 5
6
7
9
8
10
11
12
13
1
(8 pages)
(11 pages)
(14 pages)
(18 pages)
(11 pages)
(19 pages)
(18 pages)
(6 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels